Polycom RMX 1500 Getting Started Manual page 59

5
Enter the required DNS information in the dialog box.
Table 2-6 Fast Configuration Wizard – DNS
Field
MCU Host Name
DNS
Register Host
Names
Automatically to
DNS Server
Local Domain
Name
Primary DNS
Server IP Address
Polycom RMX 1500/2000/4000 Getting Started Guide
Description
Enter the name of the MCU on the network.
Default name is RMX.
Select:
•
Off – if DNS servers are not used in the network.
•
Specify – to enter the IP addresses of the DNS
servers.
Note: The IP address fields are enabled only if
Specify is selected.
Select this option to automatically register the MCU
Signaling Host and Shelf Management with the DNS
server.
Enter the name of the domain where the MCU is
installed.
The static IP address of the primary DNS server.
2-29