Pcm Interface; Initiating Pcm - Polycom RMX 1500 Getting Started Manual

Chapter 3-Basic Operation

PCM Interface

3-92

Initiating PCM

For IP endpoints: PCM is activated by pressing the Far key (
followed by any of the Arrow Keys on the Remote Control Device.
For ISDN/PSTN endpoints: PCM is activated by pressing ## on the
Remote Control Device.
When PCM becomes active, the top level of the PCM Main Menu is
displayed on the conference chairperson's endpoint:
Main Menu - Level 1
Right Arrow:
Corresponds to the
Remote Device's
Right Arrow Key
Action:
Go to Sub-Menu of
Selected Option
(Click&View)
PCM Main Menu - Level 2 can only viewed and accessed by ISDN endpoints by
using DTMF Codes 7 and 8.
Main Menu - Level 2
)
Arrow Indicator:
There are more menu
options on the next
page
Arrow Indicator:
There are menu
options on the
previous page