Monitoring Ongoing Gateway Sessions; Participant Level Monitoring; Participant Connection Monitoring - Polycom RMX 1500 Getting Started Manual

Chapter 3-Basic Operation

Participant Level Monitoring

3-54
The conference chairperson can enable or disable the Secure mode from
the DTMF input device (touch-tone telephone or the endpoint's remote
control), using the appropriate DTMF code (the default code is *71).
During the secure conference, the chairperson and participants can
perform various operations, such as muting, via their DTMF input device
using the appropriate DTMF codes. However, because Secure conferences
cannot be monitored, these operations or status changes are not displayed
in the Conferences or Participants panes.
A special icon is used to indicate that the conference is in Secure mode.

Monitoring Ongoing Gateway Sessions

Ongoing Gateway Sessions that are created when calling the Gateway
Profile, are listed in the ongoing Conferences list pane and are monitored
in the same way as the conferences.
For more details, see the RMX 1500/2000/4000 Administrator's Guide,
"Conference Level Monitoring" on page 11-3.

Participant Connection Monitoring

When a conference is selected in the Conference List, details of its
participants appear in the List pane.
The following participant indicators and properties are displayed:
Table 3-6 Participant Monitoring – Indicators and Properties
Column Icon/Description
Name Displays the name and type (icon) of the participant:
Audio Participant – Connected via IP phone or
ISDN/PSTN.
Video Participant – Connected with audio and video
channels.