Camera; Installer Menu; Positioning - Bosch MIC IP starlight 7000i User Manual

MIC IP starlight 7000i
6

Camera

6.1

Installer Menu

Application variant
–
–
–
Base frame rate
Select the base frame rate for the camera.
Note: Shutter times, frame rates, and the analog output (if present) are affected by this value.
Notice!
Changing the field Base frame rate
A change to the parameter in the field Base frame rate requires approximately 10-20 seconds
to complete. During this time, no changes can be made. The cameo image freezes.
Coding standard
Select the encoding mode, H.264 or H.265 .
Orientation
The orientation of the camera. Options: Normal, Inverted, Canted.
SC settings
Click the Default button to restore all camera settings to their original defaults.
Reboot device
Click the Reboot button to reboot the camera. There is a ten (10) second pause before the
camera starts its homing phase. During the homing phase, the camera will complete finding
the upper and lower tilt limits.
Factory defaults
Click Defaults to restore the factory defaults for the camera. A confirmation screen appears.
Allow several seconds for the camera to optimize the picture after a reset.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
6.1.1

Positioning

The Positioning feature describes the location of the camera and the perspective in the
camera's field of view.
Perspective information is essential to Video Analytics, as it enables the system to
compensate for the illusory smallness of distant objects.
Only through use of perspective information is it possible to distinguish objects such as
persons, bicycles, cars and trucks, and accurately compute their real size and speeds as they
move through 3D space.
However, to calculate perspective information accurately, the camera must be directed at a
single, flat horizontal plane. Multiple and inclined planes, hills, stairs can falsify perspective
information and produce incorrect object information such as size and speed.
Bosch Security Systems
If you are connecting to MIC-ALM-WAS-24, select "[camera name] - IO" to allow the
camera to recognize additional inputs and outputs from this device and to allow control
of an external washer unit.
If you are connecting to VJC-7000-90, select "[camera name] – VJC-7000" to allow the
camera to recognize additional inputs and outputs from this device and to allow control
of an external washer unit.
Otherwise, select "[camera name]."
User Manual
Camera | en 23
2017.11 | 1.2 |