Table of Contents
Advertisement
Configuring connector Services
This section describes how to configure the connector Services that are common to multiple
connectors.
Document Settings (see page 86)
■
Scanner Settings (see page 90)
■
Tracing settings (see page 91)
■
Copying Services settings
Each connector profile can have its own set of Services settings. When the settings are similar
between connector profiles, you may want to copy them. The Copy To button in the Services
pane enables you to copy settings. (If you have configured only one profile for the selected
connector, the button is not available.
To copy Services settings
In the console tree, select <<connector_name> > Services.
1
The Services pane appears.
Select the connector profile whose settings you want to copy.
2
Click Copy To.
3
The Copy Services Settings window opens. The Copy From field displays the name of
the currently selected connector profile.
In the To list, select the target profile.
4
In the Select Profile Settings area, select each profile setting (Document Settings, Scanner
5
Settings, or Tracing) that you want to copy to the target profile.
Click OK.
6
The Services pane appears.
Select the target profile and then click Save
7
®
eCopy ShareScan
Installation and Setup Guide
|
85
Advertisement
Table of Contents
