Configuring the ID Services function
ID Services are available on compatible MFP devices that use identification devices such as card
readers or proximity cards. ID Services allow user authentication credentials from the
identification device to be encrypted and passed to ShareScan. This preserves security and
streamlines the logon process by allowing the user to avoid entering authentication credentials at
the device.
To configure ID Services:
In the console tree, select the device for which you want to enable the ID Service and then
1
select Activity Tracking.
The right pane displays the Activity Tracking information.
On the Activity Tracking tab, select Enable and then click Save.
2
ID Services cannot be activated unless Activity Tracking is enabled.
Select the ID Services tab.
3
Enable the service and specify the settings (see Table 55).
4
Click Save.
5
The ID Service settings are saved for the selected device.
®
eCopy ShareScan
Installation and Setup Guide
|
179