Table of Contents
Advertisement
To update an existing profile:
In the console tree, select the connector whose profile you want to modify.
1
In the list of profiles, select the profile you want to modify.
2
Update the Properties settings and then click Save.
3
In the Save Profile window, select the target profile and then click Save.
4
Update the Services settings and then click Save.
5
Note:
If you update the Services settings before updating the Properties settings and you then click
Save, the Save Profile window opens. You must then select the target profile.
Activating connector profiles
To make connector profiles available at a device, you activate the connectors and then select the
connector profiles. You can activate up to nine connector profiles on each device.
Each connector profile that is activated on a device is represented by a separate button on the
touch screen. While you can create as many profiles as you like for a connector, you can activate a
maximum of nine connector profiles on a single device.
To activate connector profiles:
In the console tree, select Devices > <device_name> > Properties.
1
Select the Selection tab and then select the Activate Connector check box for the
2
connector that you want to activate.
The Select Connector Profiles window opens.
In the Select Profiles column, select the connector profile that you want to activate.
3
If your company uses Document Services, use the Select a Document Service Profile list
4
to select the Document Service profile that you want to associate with the connector
profile. For more information on Document Services, see page 67.
The Document Service profile name appears next to the connector profile name in the
table.
Click OK and then click Save.
5
You can only select configured profiles, which appear in black. Unconfigured profiles
appear in red.
®
eCopy ShareScan
Installation and Setup Guide
|
65
Advertisement
Table of Contents
