Starting And Stopping The Client - eCopy ShareScan 4.2 Installation And Setup Manual

|
194 Reference: Managing the ScanStation Client

Starting and stopping the Client

You can start the Client at the device or from the Administration console. If the Windows Task
Manager is open when you start the Client, the Client will automatically close it.
Note: On a ShareScan system running on Windows Vista, you cannot start the Client from the
Administration console.
To start the Client at the device:
Select Start > Programs > eCopy Applications.
1
Select ScanStation Client.
2
To quit the Client at the device:
By default, there are two ways to quit the Client at the device:
If the Client is configured to use a hard keyboard, press E
■
Yes button in the Exit window.
If the Client is configured to use the on-screen (soft) keyboard, press A
■
press the Exit icon.
You can configure the Client so that users must enter a password in order to quit the Client.
To configure and start the Client from the Administration console:
In the console tree, select Devices > <device_name> > Manage.
1
The Manage ScanStation Client pane displays Client information and enables you to
configure settings for the Client.
Select the Status tab.
2
The information in the Driver Name field is based on the product key.
To keep unauthorized users from quitting the Client, select the Settings tab, enter a
3
password in the Password (Exit) field, and then click Save.
or A +F4 and then press the
SC LT
BOUT
and then