Firewall And Switch Worksheet; Table 64. Firewall And Switch Worksheet - eCopy ShareScan 4.2 Installation And Setup Manual

Firewall and switch worksheet

Certain TCP ports must be open for communication between the devices on the network. You
can open the required ports (on switches, routers, or firewalls) between specific devices; you do
not need to open a required port to all devices on the network.
Copy and complete the worksheet for each router, switch, firewall, or multi-homed PC that could
affect communication.
Item Description
Manufacturer
Model
Location
9030, 9100 Must be open for communication between the Services
Manager and eCopy-enabled devices.
8899, 9988 on Optional, for encrypted UDP communication between the
multicast IP Services Manager and eCopy-enabled devices.
address
a
239.254.5.6
8888, 9999 on Required, if you are using the eCopy Inbox Agent with
multicast IP Scan to eCopy Desktop.
address Optional, for unencrypted UDP communication between
239.254.5.6 eCopy Inbox Agent, Services Manager, and eCopy Desktop
clients.
9200 - 9250 Used internally on PCs where the Services Manager is
running. No special configuration is required.
9010, 9101 Used for communication between the Administration
console and the eCopy Agent service.
7125 Used internally on PCs where the Services Manager is
running.
a.
239.254.5.6 is an administratively scoped Class D IP address. It is used so that the packets are contained within the
network. The multicast source relies on multicast-enabled routers to forward the packets.

TABLE 64. Firewall and switch worksheet

®
eCopy ShareScan Installation and Setup Guide
Firewall or Example
other device
Cisco
2-C22
Open
Open
Open
Default
|
243