|
212
Reference: Using eCopy Connectors
Copy
Copy is available for some devices running ShareScan Embedded software. If you try to activate a
Copy profile on an unsupported device, the system will display an error message.
Before using a connector, review the quick reference section (see page 201). That section includes
information about performing functions that are common to many connectors, such as specifying
scanner and document settings.
To use Copy:
Place your document in the feeder or on the glass.
1
Access the Client.
2
On the main Client screen, press Copy.
3
Specify the settings (see Table 59). The available settings depend on the device.
4
When you have specified the settings, press Copy.
5
The device copies your document and the Copy Status window opens.
Press Done.
6
Setting
Paper Tray
Color Mode
Image Mode
Brightness
Number of Copies
Finisher
Two-sided
Image Quality
Adjustment
TABLE 59. Copy settings
Description
The paper tray to use.
The color mode. Available only on color devices.
The image mode that best corresponds to the document that you are copying.
Move the slider or use the + and - buttons to adjust the brightness.
The number of copies.
Enables you to specify the finishing mode.
Enables you to specify two-sided mode.
Enables you to remove the background color from the document and to prevent
bleed-thru.