|
150
Reference: Connector-specific configuration information
Configuring a data source
You can configure an existing data source or a new data source.
To configure an existing data source:
If the Select Recent Data Source window opens, select the data source that you want to
1
use and then click OK.
The Data Field Selector window opens.
Perform one of the following functions:
2
Map the document destination for the index fields (see page 146).
■
Map Quick Connect index fields to database fields (see page 148).
■
Set the default values for file name or index fields that will use a database as the source
■
of values (see page 149).
To configure a new data source:
In the New destination window, click Configure.
1
The Configure Data Source window opens.
Select the database type.
2
Specify the appropriate settings (see Table 42).
3
After specifying the settings, click Test Connection.
4
When the system displays the "Successfully attached to the database" message, click OK
5
twice.
The Data Field Selector window opens.
Perform one of the following functions:
6
Map the document destination for the index fields (see page 146).
■
Map Quick Connect index fields to database fields (see page 148).
■
Set the default values for file name or index fields that will use a database as the source
■
of values (see page 149).