Table of Contents
Advertisement
eCopy Connector for SMTP using LDAP
Before using a connector, review the quick reference section (see page 201). That section includes
information about performing functions that are common to many connectors, such as specifying
scanner and document settings.
To use eCopy Connector for SMTP using LDAP:
Place your document in the feeder or on the glass and then access the Client.
1
If prompted, enter your logon information.
2
On the main Client screen, press Scanner Settings to change any user-modifiable settings.
3
After changing the settings, press OK.
Press the button associated with the connector to start scanning the document.
4
When the connector finishes scanning the document, review the scanned pages on the scan
5
preview screen. If necessary, scan additional pages or re-scan any of the original pages.
Press Document Settings to review or change any user-modifiable settings. After
6
changing the settings, press OK.
When you have scanned all the pages in the document and are satisfied with the settings,
7
press the delivery button (Send or Next, depending on the Client).
If the Output File Name screen appears, leave the default file name or enter a new name.
8
The number of screens, and the buttons you press to continue to subsequent screens,
depends on the Client you are using.
®
eCopy ShareScan
Installation and Setup Guide
|
221
Advertisement
Table of Contents
