Defining A Scanning Destination; Table 39. Quick Connect Properties: Destination Types - eCopy ShareScan 4.2 Installation And Setup Manual

Defining a scanning destination

The Destinations tab enables you to define scanning destinations. You must define at least one
destination. If you define more than one destination, Quick Connect will prompt the user to
select one during the scanning process.
To define a destination:
Select Quick Connect > Properties.
1
Select the Destinations tab and then click New.
2
The New destination window opens.
In the Name field, type the name of the new destination.
3
Specify the type of destination (see Table 39) and then specify information for the new
4
destination.
When you have defined the new destination, click OK.
5
The Destinations list includes the new destination.

TABLE 39. Quick Connect Properties: Destination types

Destination Section
Type
Windows Folder location
Folder, Novell
NetWare
Folder, FTP
Folder,
WebDAV
Folder
eCopy ShareScan
Field/ Description
Button
Path to the Destination information for the scanned documents.
folder For Windows or Novell folders, click the Browse
button and then select an existing folder or create a
new folder and then select it. For an FTP folder, enter
the FTP location, such as "ftp://ftp01/scans". (The
Browse button is not available for FTP folders.) For a
WebDAV folder, enter the Web location, such as
"http:/10.10.10.100/scans" or "https:/10.10.10.100/
scans".
Enable Enables users to select a subfolder at the device.
subfolder
navigation
Maximum The number of folder levels down that users may
folder level navigate.
Acquire Applies only to WebDAV Folder option. Enables you to
Scheme select an authentication scheme (NTLM, NTLM/
Kerberos, or Basic.) After selecting the scheme, the
authentication options specified in the scheme are
enabled.
®
Installation and Setup Guide
|
137