Copy - eCopy ShareScan 4.2 Installation And Setup Manual

|
94 Reference: Connector-specific configuration information

Copy

Copy enables users to perform a variety of copying functions using eCopy ShareScan Embedded
software. When you activate the connector on a device running the embedded Client, the user
does not need to quit the Client to make copies.
You can create Copy connector profiles on any PC running the Services Manager, and you can
publish them to any Services Manager that supports the ShareScan Embedded software.
Copy is available for some, but not for all, embedded devices. If you try to activate a Copy profile
on an unsupported device, the system will display an error message.
Note: You cannot use a Copy profile on a ScanStation.
To configure a Copy profile:
In the console tree, select Copy > Properties.
1
Select the Display tab and then specify the Image and Label settings (see page 69).
2
Click Save, select or specify the profile name, and then click Save.
3
In the console tree, select Copy > Services.
4
Tracing is the only service available for Copy.
Select the Tracing tab and then specify the settings (see page 91).
5
Click Save, select the profile name, and then click Save.
6