Table 25. Exchange Properties: General Settings Tab - eCopy ShareScan 4.2 Installation And Setup Manual

|
104 Reference: Connector-specific configuration information
All the settings in this table apply to the eCopy Connector for Microsoft Exchange. Settings that
also apply to the eCopy Connector for Fax via Microsoft Exchange are indicated in the table.
Section Field Name
Sender Send from personal
Settings account
(Available in
the eCopy
Connector
for Fax via
Microsoft
Exchange.)
Add messages to
Sent Items folder
Recipient Allow user to select
Settings recipients
Allow user to add
recipients to Cc list
Send to self

TABLE 25. Exchange Properties: General Settings tab

Description
Enables users to send e-mail from their personal Exchange account,
rather than from the ShareScan User account (specified on the Basic
Settings tab).
Prompts the user at the device to log on to Exchange. The user can
enter his or her personal logon information or, if authorized, another
user's logon information. The connector sends each e-mail from the
specified account.
Saves sent messages in the user's Sent Items folder.
Enables the user at the device to select recipients for the scanned
documents.
Enables the user at the device to send a copy of a message to one or
more recipients who are not the primary recipients.
Disables the list of recipients and sends the scanned documents only
to the logged on user. You can use the $$FILENAME$$ variable on the
Subject or Notes line to distinguish among scanned documents.