Configuring Logon Settings - eCopy ShareScan 4.2 Installation And Setup Manual

Configuring logon settings

You can configure the ScanStation to automatically start the Client and log on as a specified user
whenever the ScanStation is started. If you do not do this, you must start the Client manually each
time you start the ScanStation.
When you are remotely connected to the Administration console, you may find it useful to restart
the ScanStation. You can do this using the Reboot ScanStation button on the ScanStation Logon
tab. The target ScanStation will display a warning that includes a 10 second waiting period.
To configure logon settings:
In the console tree, select Devices > <device_name> > Manage.
1
The Device properties pane appears.
Select the ScanStation Logon tab.
2
Under Automatic Logon to Windows, specify the settings (see Table 56).
3
Click Save.
4
Option
Log on automatically at
ScanStation startup with the
following credentials
Use preceding credentials to
start/stop the ScanStation
Client
Automatically start ScanStation
Client at startup (all users)
Client: ScanStation logon settings
TABLE 56.
Description
At ScanStation startup, or when the device is restarted, automatically
logs on to Windows using the specified user name, password, and
domain.
Logs on using the specified user name, password, and domain. This
option is required if you want to start, stop, or restart the Client from
the Administration console.
Starts the Client as soon as a user logs on to the ScanStation or after an
automatic logon. If you are only using the specified logon information
to start and stop the Client, users can log on to the ScanStation using
credentials other than the ones specified on this tab.
®
eCopy ShareScan Installation and Setup Guide
|
197