Table of Contents
Advertisement
3
Specifying the Phone Wiring System
The connected wiring system can be set to either PSTN (Public Switched
Telephone Network) or PBX (Private Branch Exchange).
For a PBX system, the outside line access number (or extension number)
must be specified. The outside line access number (or extension number)
is programmed in the [#] key.
To specify the telephone wiring system
1
Press the [INITIAL SET] key.
The first screen of the Initial Set
mode appears.
2
Press the [ ] key 9 times to select "COMM.SETTING".
3
From the KEYPAD, press the [3]
key.
4
Using the [ ] and [ ] keys, select
either "PSTN" (Public Switched
Telephone Network) or "PBX"
(Private Branch Exchange), and
then press the [YES] key.
5
If "PBX" was selected, use the
KEYPAD to enter the number that
should be dialed to access the
outside line, and then press the
[ENTER] key.
The "COMM.SETTING" menu appears again.
3-38
Before Making Copies or Faxing
Konica 7115F/7118F
Advertisement
Table of Contents
