To Change The Batch Transmission Setting - Konica Minolta 7115F Instruction Manual

Initial Set Mode – Fax Functions

To change the batch transmission setting

1
Select the "FAX REGISTRATION"
menu.
❍ Refer to "To select the "FAX
REGISTRATION" menu" on
page 10-2.
2
Press the [5] key from the KEYPAD
to select "BATCH TX".
3
Press the one-touch dial key
programmed with the batch
transmission setting that you wish to
change.
4
Press the [CLEAR] key, and then
use the KEYPAD to enter the new
transmission time.
5
When you are finished making
changes, press the [YES] key.
6
Press the [NO] key to return to the
"FAX REGISTRATION" menu.
Konica 7115F/7118F
10
10-27