9
To select the "PAPER SOURCE SETUP" menu
1
Press the [INITIAL SET] key.
2
Press the [ ] key once to select
"PAPER SOURCE SETUP".
3
From the KEYPAD, press the key ([1] through [3]) for the "PAPER
SOURCE SETUP" function that you wish to set.
❍
The "PAPER SOURCE SETUP" functions are as follows:
1 INCH/METRIC
2 TRAY1 PAPER
3 AUTO SELECT
Tip
If, at any time, you wish to quit setting a "PAPER SOURCE SETTING"
function, press the [NO] key. When the message "STOP SETTING?"
appears, press the [YES] key to quit.
9-12
Initial Set Mode – Copy Functions
Konica 7115F/7118F