To Specify The Default Resolution Setting ("Resolution" Function) - Konica Minolta 7115F Instruction Manual

Initial Set Mode – Fax Functions

To specify the default resolution setting ("RESOLUTION" function)

1
Select the "TX OPERATION" menu.
❍ Refer to "To select the "TX
OPERATION" menu" on
page 10-35.
2
Press the [2] key from the KEYPAD
to select "RESOLUTION".
3
Using the [ ] and [ ] keys, select
the desired resolution setting, and
then press the [YES] key.
❍ The resolution settings appear
as follows.
NORM: Normal
FINE: Fine
S/F: Super Fine
PHOTO: Photo
If "PHOTO" was selected, a screen appears, allowing you to make a
detailed setting. (Continue with step 4.) If any setting other than
"PHOTO" was selected, the "TX OPERATION" menu appears again.
4
Using the [ ] and [ ] keys, select
the desired halftone setting, and
then press the [YES] key.
❍ The halftone settings appear as
follows.
NORM: Normal
FINE: Fine
S/F: Super Fine
The "TX OPERATION" menu appears again.
Konica 7115F/7118F
10
10-37