Konica Minolta 7115F Instruction Manual page 201

Initial Set Mode – Copy Functions
9.5 Specifying Copy Settings ("COPY SETTING 1" &
"COPY SETTING 2" Menus)
The settings that are automatically selected when the machine is turned
off or the [AUTO RESET] key is pressed are called the "default settings".
From the "COPY SETTING 1" menu, the default settings for various
functions can be specified.
"COPY SETTING 1" menu:
No. COPY SETTING 1
1 PAPER PRIORITY
2 DENSITY PRIORITY
3 DENSITY LEVEL(A)
4 DENSITY LEVEL(M)
5 BINDING POS.
6 MARGIN SETTING
7 ERASE SETTING
Konica 7115F/7118F
Description
This function can be used to specify the paper size or tray
that should be given priority when the "Auto" zoom setting is
selected.
• The manufacturer's default setting is "A4 C".
This function can be used to set the density to "AUTO",
"MANUAL" or "PHOTO" when the machine is turned off or
the [AUTO RESET] key is pressed.
• The manufacturer's default setting is "AUTO".
This function can be used to set the density level of the
"AUTO" density setting to one of the three settings between
"LIGHT" and "DARK".
• The manufacturer's default setting is the middle level.
This function can be used to set the density level of the
manual density setting to one of the five settings between
"LIGHT" and "DARK".
• The manufacturer's default setting is the middle level.
This function can be used to set whether the first page of a
book to be scanned is on the left (left-bound) or on the right
(right-bound).
• The manufacturer's default setting is "LEFT".
This function can be used to specify between 0 mm and
20 mm (in units of 1 mm) the width of the binding area
(margin) when copying documents to be bound.
• The manufacturer's default setting is 10 mm.
This function can be used to specify between 5 mm and
20 mm (in units of 1 mm) the width that is erased when
making copies with the "Erase" function set to "Left", "Top"
and "Frame".
• The manufacturer's default setting for the "Left", "Top" and
"Frame" erase settings is 10 mm.
9
9-31