Konica Minolta 7115F Instruction Manual page 195

Initial Set Mode – Copy Functions
6
Using the [ ] and [ ] keys, select
either "EDIT" or "DELETE", and
then press the [YES] key.
❍ If "EDIT" was selected, a screen
appears, allowing you to edit the
ID number. (Continue with step 7.)
❍ If "DELETE" was selected, the current ID number is deleted. (The
message "ID NO. XXX DELETED" appears.) To change or delete
other ID numbers, return to step 3.
7
Use the KEYPAD to enter the new
number.
8
Press the [YES] key.
❍ If the new ID number has already been registered, the message
"ID NO. IS USED" appears. Press the [NO] key, and then enter a
different ID number.
After the message "ID NO. XXX EDITED" appears, a screen appears,
allowing you to enter the next ID number to be changed/deleted.
9
When you are finished changing/
deleting ID numbers, press the [NO]
key.
The "ADMIN. MANAGEMENT"
menu appears again.
Konica 7115F/7118F
9
9-25