Specifying Pstn/Pbx; To Specify The Telephone Wiring System - Konica Minolta bizhub 162 Facsimile Manual

5

Specifying PSTN/PBX

The connected wiring system can be set to either PSTN (Public Switched
Telephone Network) or PBX (Private Branch Exchange).
For a PBX system, the outside line access number (or extension number)
must be specified. The outside line access number (or extension number) is
programmed in the [#] key.

To specify the telephone wiring system

1
Select the
SETTING menu.
For details, refer to page 5-59.
2
Press the [*] and [)] keys, select ei-
ther
phone Network) or
Branch Exchange), and then press
the [Yes] key.
3
If
PBX
pad to enter the number that should
be dialed to access the outside line,
and then press the [Yes] key.
The COMM.SETTING menu appears again.
5-62
in the COMM.
PSTN/PBX
(Public Switched Tele-
PSTN
PBX
was selected, use the 10-key
(Private
Using the utility mode
Fax kit FK-505