Konica Minolta 7115F Instruction Manual page 50

3
25
No. Part Name
25 [DENSITY SET] key, [ ]
and [ ] keys
26 [PAPER SIZE] key
27 [LENS] key, [
keys
28 [APS/AMS] key
29 [AUTO RESET] key
30 [START] key
31 [STOP] key
32 [POWER SAVE] key
33 [COPY] key
3-20
39 38
41 40
26 27 28
Function
• Used to specify the scanning density of copies.
• Used to specify the selection at the left or right in
setting screens.
Used to select the size of the paper to be printed on.
] and [ ] • Used to select a preset enlargement or reduction
ratio.
• With each press, a zoom ratio between
×
2.00 in 0.01 increments is selected.
• Used to specify the selection above or below in
setting screens and menus.
Used to select between the "APS" or the "AMS" function.
• Cancels all copy functions and returns them to their
default settings (Deletes all queued jobs). (p. 3-24)
• Cancels all fax functions and returns them to their
default settings.
*Queued timer transmission faxes and documents
received during memory reception are not cancelled.
• Starts copying.
• Starts a fax transmission.
• Queues a copy job if pressed while the machine is
warming up. (p. 3-25)
• The indicator lights up in green to indicate that the
machine is ready to start copying or it lights up in
orange to indicate that the machine is not ready to
start copying.
• Stops the multi-page copy operation.
• Stops the fax transmission or reception.
Press to enter Power Save mode. (p. 3-25)
Press to enter Copy mode. The indicator lights up in
green to indicate that the machine is in Copy mode.
Before Making Copies or Faxing
35
37 36 34 33
30
29
Konica 7115F/7118F
32
31
×
0.50 and