Initial Set Mode – Fax Functions
To change/delete a programmed speed dial number
1
Select the "FAX REGISTRATION"
menu.
❍
Refer to "To select the "FAX
REGISTRATION" menu" on
page 10-2.
2
Press the [2] key from the KEYPAD
to select "SPEED DIAL".
3
Using the KEYPAD, enter the speed
dial number that you wish to change
or delete.
4
Press the [NO] key.
5
Using the [ ] and [ ] keys, select
either "EDIT" or "DELETE", and
then press the [YES] key.
❍
If "EDIT" was selected, the fax
number is displayed. (Continue
with step 6.)
❍
If "DELETE" was selected, the settings programmed for the speed
dial number are deleted and the "Speed dial input" screen appears
again.
❍
If you try to change the settings for a speed dial number used in
group dialing or program dialing, a confirmation message appears,
asking whether or not to change the corresponding settings
programmed in group dialing or program dialing.
If the [YES] key is pressed, the corresponding settings
programmed in group dialing or program dialing are changed.
If the [NO] key is pressed, the corresponding settings programmed
in group dialing or program dialing are deleted.
Konica 7115F/7118F
10
10-11