Selecting The Paper Source; To Make Copies Using The "Aps" Function - Konica Minolta 7115F Instruction Manual

Basic Copy Operations
4.3

Selecting the Paper Source

Before making a copy, the paper tray containing the paper that will be
used must be selected. Either the paper source is selected automatically
when the size of the document is detected, or the desired paper source
can be selected manually.
G APS:
If the "APS" function is selected, the paper tray containing the most
suitable size of paper is selected based on the size of the document
and the specified.
G Manual paper selection:
The paper tray containing the paper that you wish to use can be
selected.
Note
The Automatic Document Feeder (optional) is needed for copying with
the "APS" function.

To make copies using the "APS" function

1
Load the document into the Automatic Document Feeder.
❍ Refer to "Loading the Document" on page 4-1.
2
Press the [APS/AMS] key until the
"APS" function is selected.
❍ Check that "AUTO" appears in
the bottom line of the screen.
3
If necessary, specify any other copy settings.
❍
Zoom (p. 4-21)
❍
Copy density (p. 4-25)
4
Enter the number of copies to be made on the KEYPAD, and then
press the [START] key.
Konica 7115F/7118F
4
4-11