To Register User (Section) Id Numbers - Konica Minolta 7115F Instruction Manual

Initial Set Mode – Copy Functions

To register user (section) ID numbers

1
Select the "ADMIN.
MANAGEMENT" menu.
❍ Refer to "To select the "ADMIN.
MANAGEMENT" menu" on
page 9-20.
2
Press the [2] key from the KEYPAD
to select "COPY TRACK".
❍
Using the KEYPAD, enter the
6-digit administrator access
number, and then press the
[ENTER] key.
3
Using the [ ] and [ ] keys, select
"ID NO. REG.", and then press the
[ENTER] key.
4
Using the KEYPAD, enter the
desired ID number for the account
(section), and then press the
[ENTER] key.
❍
Enter a 3-digit ID number.
❍
If you wish to correct the ID number, press the [NO] key, and then
use the KEYPAD to enter the new number.
Once the ID number is registered, a screen appears, allowing you to
enter the next ID number to be registered.
5
When you are finished registering
ID numbers, press the [NO] key.
The "ADMIN. MANAGEMENT"
menu appears again.
Note
If you try to register more than 20 ID numbers, the message "UP TO
20 SECTIONS" appears.
Konica 7115F/7118F
9
9-23