To Display/Clear The Total Count For A Specific Account - Konica Minolta 7115F Instruction Manual

9

To display/clear the total count for a specific account

1
Select the "ADMIN.
MANAGEMENT" menu.
❍ Refer to "To select the "ADMIN.
MANAGEMENT" menu" on
page 9-20.
2
Press the [2] key from the KEYPAD
to select "COPY TRACK".
❍
Using the KEYPAD, enter the
6-digit administrator access
number, and then press the
[ENTER] key.
3
Using the [ ] and [ ] keys, select
"COPY TRACK DATA", and then
press the [ENTER] key.
4
Using the [ ] and [ ] keys, select
"DISPLAY", and then press the
[YES] key.
5
Using the [ ] and [ ] keys, select
the ID number for the counter that
you wish to check, and then press
the [ENTER] key.
❍
The desired ID (section) number
can also be entered using the
KEYPAD.
❍ When clearing the counter for a
specific account (section), the
ID (section) number for that account should be selected.
The total count for the selected account (section) is displayed.
9-26
Initial Set Mode – Copy Functions
Konica 7115F/7118F