Setting Up Relay Boxes ("Relay Box" Function) - Konica Minolta 7115F Instruction Manual

Initial Set Mode – Fax Functions
5
Using the KEYPAD, enter the 4-digit
mailbox ID, and then press the
[ENTER] key.
❍ If you wish to change the ID,
press the [NO] key, and then
enter the new number.
The specified mailbox is deleted.
6
Press the [AUTO RESET] key.
The main screen appears again.

Setting Up Relay Boxes ("RELAY BOX" function)

A relay box ID must first be set in order for this machine (acting as a relay
station) to receive a document from another fax machine (transmitting
station), then transmit the document to multiple recipients (receiving
stations).
Note
A relay box ID cannot be the same as a mailbox ID.
This machine (acting as a relay station) can be set to send back a relay
result report. The fax number of the recipient of the report (either the
transmitting station or any other recipient) must be specified using
either the one-touch dial keys or a speed dial number. Therefore,
before using this function, be sure that a one-touch dial key or a speed
dial number is programmed with the fax number of the report recipient.
Konica 7115F/7118F
10
10-31