Basic Copy Operations
To copy onto special paper (1st Tray)
If special paper, such as OHP transparencies, postcards or cards, are
loaded into the 1st Tray, first set the "TRAY1 PAPER" function in the
"PAPER SOURCE SETUP" menu of the Initial Set mode ("To specify the
size of paper loaded into the 1st Tray ("TRAY1 PAPER" function)" on
page 9-14).
Depending on the paper type set for the "TRAY1 PAPER" function, the
screen changes as shown below.
Konica 7115F/7118F
Postcards or cards
OHP transparencies
4
4-13