7
Polling Transmission
Documents scanned and saved in the memory can be retrieved by the
recipient.
Note
Polling transmission is compatible with F code transmission.
If the memory is full, polling transmission cannot be set.
With polling transmission, the recipient incurs the cost of the call.
To set up polling transmission
1
Position the document to be faxed.
2
If necessary, change the "Resolution" setting (p. 6-8).
3
Press the [FAX SET] key.
4
Press the [5] key from the KEYPAD.
or
Press the [FAX SET] key 5 times to
select "POLLING TX", and then
press the [ENTER] key.
5
Using the [ ] and [ ] keys, select
either "SINGLE" or "MULTI", and
then press the [YES] key.
❍
To allow only one polling
transmission request, then
delete the document from the memory, select "SINGLE".
❍
To allow multiple polling transmission requests, select "MULTI".
The document is stored in the memory until it has been deleted.
7-16
Fax Transmission/Reception Methods
Konica 7115F/7118F