Konica Minolta 7115F Instruction Manual page 219

Initial Set Mode – Fax Functions
4
Using the KEYPAD, enter the fax
number of the recipient.
❍
The fax number can contain a
maximum of 30 digits.
For details on the characters
that can be entered, refer to p. 6-11.
❍ To enter a sub-address, continue with step 5.
❍ If a sub-address will not be entered, press the [YES] key after
entering the fax number, and then skip to step 8.
❍
If "+" (one-touch dial key [22]) is added after the entered number,
the programmed number can be used with combination dialing
(p. 6-16).
❍
If you wish to change the fax number, press the [NO] key, and then
enter the correct number.
❍
For details on F codes (sub-address and SID), refer to "Using F
codes" on page 7-25.
5
Press the [ ] key, and then use the
KEYPAD to enter the sub-address.
❍ A number up to 20 digits long
can be entered for the sub-
address.
❍
To enter an SID, continue with step 6.
❍
If an SID will not be entered, skip to step 7.
6
Press the [ ] key, and then use the
KEYPAD to enter the SID.
❍ A number up to 20 digits long
can be entered for the SID.
7
Press the [ENTER] key.
8
Enter the name of the programmed
number.
❍ For details on entering text, refer
to "Entering Text" on page 3-30.
❍
Text up to 20 characters long
can be entered for the name.
9
Press the [ENTER] key.
Konica 7115F/7118F
10
10-9