To Set The "Auto Select" Function - Konica Minolta 7115F Instruction Manual

9

To set the "AUTO SELECT" function

1
Select the "PAPER SOURCE
SETUP" menu.
❍ Refer to "To select the "PAPER
SOURCE SETUP" menu" on
page 9-12.
2
Press the [3] key from the KEYPAD
to select "AUTO SELECT".
3
Using the [ ] and [ ] keys, select a
paper tray, and then press the
[ENTER] key.
4
Using the [ ] and [ ] keys, select
either "DISABLE" (does not allow
automatic paper selection) or
"ENABLE" (allows automatic paper
selection), and then press the [YES]
key.
❍ If "DISABLE" was selected, a screen appears, allowing you to set
paper source switching.
❍ If "ENABLE" was selected, the "PAPER SOURCE SETUP" menu
appears again.
5
Using the [ ] and [ ] keys, select
either "FIXED" (does not allow
automatic paper source switching)
or "CONTINUOUS" (allows
automatic paper source switching),
and then press the [YES] key.
The "PAPER SOURCE SETUP" menu appears again.
9-16
Initial Set Mode – Copy Functions
Konica 7115F/7118F