Konica Minolta 7115F Instruction Manual page 62

3
Correcting text and input precautions
G To erase all entered text, press the [NO] key.
G
To delete only part of the entered text, use the [ ] and [ ] keys to
move the cursor (_) to the character that you wish to delete, and then
press the [Delete] key (one-touch dial key [27]).
G
To change an entered character, use the [ ] and [ ] keys to move the
cursor (_) to the character that you wish to change, and then enter the
new character. (The character at the cursor's position is replaced with
the new character.)
G
If the same one-touch dial key is needed to enter two characters in a
row, press the [ ] key after selecting the first character. (Refer to the
example in previous page.)
G To enter a space, press one-touch dial key [26].
3-32
Before Making Copies or Faxing
Konica 7115F/7118F