4.1.10 Polling Transmission; To Set Up Polling Transmission - Konica Minolta bizhub 162 Facsimile Manual

4

4.1.10 Polling transmission

Documents scanned and saved in the memory can be retrieved by the recip-
ient.
Note
Polling transmission is compatible with F code transmission.
A maximum number of 30 documents can be saved in the memory.
If the memory is full, polling transmission cannot be set.
With polling transmission, the recipient incurs the cost of the call.

To set up polling transmission

1
Position the document.
2
If necessary, change the resolution setting (p. 3-15).
3
Press the [Function] key.
4
Press the [5] key from the 10-key
pad.
or
Press the [Function] key 5 times to
select
the [Yes] key.
5
Using the [*] and [)] keys, select ei-
ther
press the [Yes] key.
– To allow only one polling trans-
mission request, then delete the document from the memory, select
SINGLE.
– To allow multiple polling transmission requests, select MULTI. The
document is stored in the memory until it has been deleted.
4-18
TX, and then press
POLLING
SINGLE or MULTI, and then
Fax transmission/Reception methods
Fax kit FK-505