Table of Contents
Advertisement
Viewing/changing the base station
IP address
You can only change the IP address
(page 90) if you have deactivated
dynamic assignment.
192.168.2.2 has been preset by default.
¢
¢
¢
Settings
Base
Local Network
§Menu§
¢
(enter system PIN)
IP Address
The current IP address is displayed.
~
If necessary, enter IP address
and press
.
§OK§
Please note:
For notes on the IP address, please see page 55
and the glossary on page 90.
Viewing/changing subnet mask
You can only change the subnet mask
(page 94) if you have deactivated
dynamic assignment.
255.255.255.0 has been preset by
default.
¢
¢
¢
Settings
Base
Local Network
§Menu§
¢
(enter system PIN)
Subnet Mask
The current subnet mask is displayed.
~
If necessary, enter subnet
mask and press
.
§OK§
Please note:
For notes on the subnet mask, please see
page 55 and the glossary on page 94.
Making VoIP settings
Activating/deactivating display
of VoIP status codes
If the function is activated, a VoIP status
code for your service provider is displayed.
Activate the function e.g. if you have prob-
lems with VoIP connections. You will
receive a provider-specific status code,
which supports the service when the
problem is analysed.
¢
¢
¢
Settings
Base
Telephony
§Menu§
¢
(enter system PIN)
VoIP
(‰ = on)
Status on HS
Select and press
.
§OK§
Please note:
– For how to make the setting on the
Web configurator, see page 67.
– A table with possible status codes and their
meaning can be found in the Appendix on
page 71.
Check the base station MAC
address
Depending on your network configura-
tion, it may be that you have to enter your
base station MAC address e.g. into your
router's access control list. You can check
your base station MAC address:
4 I O 2 Q
§Menu§
The base station MAC address is displayed.
a
Press and hold (idle status).
Page 49
Hide quick links:
Advertisement
Table of Contents
