Line Key Status Indication; Direct Station Select Key Status Indication - Siemens optiPoint 410 entry S V6.0 Operating Instructions Manual

Line Key Status Indication

LED Line status
OFF Idle
BLINKING Idle (forwarded)
SLOWLY
ON Busy (local)
Busy (remote station)
1) The LED indicator on the prime line key indicates immediate forwarding instead of an idle
line.
2) An active call is connected to the multiline telephone. A call is connected to the other tele-
phone.

Direct Station Select key Status Indication

LED Line status
OFF Idle
ON Busy
BLINKING Incoming call
Description
No connected calls.
The line is forwarded immediately (prime line
only)
2
The line is seized by a connection to the multiline
telephone.
4
The line is seized by a connection to another
multiline telephone.
Description
The line assigned is not used.
The main line of the target telephone is busy.
An incoming call is waiting on the main line of
the target telephone.
1
Multiline
31