Locating a handset ("Paging")
You can locate your handset using the base.
Briefly press the registration/paging key ù on the base ( page 4).
All handsets will ring at the same time ("paging"), even if the ringers are switched
Briefly press the registration/paging key ù on the base ( page 4) or press the talk key
c on the handset.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are assigned automatically on registration. You can
change these names. The name must be no more than 6 characters. The changed
name is displayed in every handset's list.
With the handset in idle status, press the direct dialling key (; to >) that is pro-
grammed for making an internal call to a selected number. The list of handsets
opens. Your own handset is indicated by <.
q Select handset u
Listening in to an external call
You want to listen in to an existing external call.
Prerequisite: The Listening In function must be activated.
Activating/deactivating the function:
Listening in to the call:
Long press of the talk key con the handset. All participants hear a signal tone. Conf.
Call is shown on the handset display.
Ending listening in:
Press the end call key a on the handset; all participants hear a signal tone.
If the first internal participant presses the end call key a, the handset that has "lis-
tened in" remains connected to the external participant.
Using multiple handsets
~ (Enter name)
q Listening In