Output For Machine With Finisher - Konica Minolta bizhub 500 User Manual

Copy operations

Hide thumbs Also See for bizhub 500:

Table of Contents

Output for Machine with Finisher

The machine with Finisher FS-510/FS-511 provides output modes as de-

scribed below.

As factory default, Finisher FS-510 is set to output the printed sheets to tray

1 in Group mode.

As factory default, Finisher FS-511 is set to output the printed sheets to pri-

mary tray (tray 2) in Group mode.

Select this setting to separate each set of a multi-page original.

Select this setting to separate the copies of each page in a multi-page

- Sort + Offset

Select this setting to output multiple copies of the original set; each sort-

ed set will be offset by 1.18 in. upon exit.

(Secondary tray (tray 1) of Finisher FS-511 is unavailable.)

- Group + Offset

Select this setting to group together multiple copies of each original and

offsets the sets by 1.18 in. upon exit.

(Secondary tray (tray 1) of Finisher FS-511 is unavailable.)

Finisher FS-510 is initially equipped with two exit trays, and one optional

output tray OT-601 can be installed. Contact your service representative,

if desired. (Optional output tray is installed in Finisher illustrated above)

Finisher FS-510 is available to output in each tray using every output

Finishing/Folding

bizhub 500/420