Selecting Magnification Ratio (Lens Mode) (continued)
To Copy in Fixed Magnification Mode
Use the 6 preset ratios (0.50, 0.65, 0.77, 1.29, 1.55, 2.00) and 3 user preset ratios to
increase or decrease magnification in fixed amounts.
Specification for Fixed Magnification Mode
❒ Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image Shift
1.
Touch ZOOM on the Basic Screen.
The popup menu for selecting the desired preset/user preset ratio will be displayed.
2.
Select the desired magnification, then touch OK.
The popup menu will disappear, and the selected ratio will be displayed on the Basic Screen.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
5.
Position original(s).
6.
Press [START].
3-14
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Three user preset ratios are adjustable by the Key Operator. See p. 13-17.
See p. 3-7 for details on setting print quantity.
See p. 3-2 to p. 3-6 for details on positioning originals.