Replenishing Staples - Konica Minolta bizhub PRO C5501 User Manual

4
4.5

Replenishing staples

Inserting a new staple cartridge into Finisher FS-520
When the staple cartridge of the Finisher FS-520 becomes empty, the Staple Cartridge indicator lights in red
in the option status area of the Machine Status Screen.
Follow the procedure below to replenish staples.
1
Open the Finisher door.
2
Pull out the stacker unit.
– Pull out the stacker unit slowly by holding the stacker unit
handle until it stops.
3
Remove the staple cartridge.
– Hold the lever on the staple cartridge, and then pull the
cartridge down to remove it.
4-18
Supplies & handling
bizhub PRO C5501