Table of Contents
Advertisement
Making Double-Sided Copies (1 2, 2 2) (continued)
Selecting TOP BIND will make copies upside down on the reverse side, while
RIGHT&LEFT BIND copies normally.
Touch OK to return to the Basic Screen.
3.
Position original FACE DOWN on the platen glass according to the
original direction, then close the document feeder or platen cover.
Be sure to start from the first page.
• See p. 12-9 for paper sizes detectable on the platen glass.
• See p. 3-8 for details on positioning originals.
• Use Non-Image Area Erase to prevent the black copy marks to be
produced when scanning the original with the document feeder or platen
cover open. See p. 10-30 to p. 10-31.
4.
Touch 1 2 on the Basic Screen to highlight it.
The STORE key will be automatically highlighted on the screen.
DO NOT press [AUTO RESET] at this point, otherwise the platen mode will be
released to disable the copier from scanning the original placed on the platen
glass.
Binding mode
Copies
3
1
1
2
2
1
2
2
3
3
1
3
3-29
Advertisement
Table of Contents
Troubleshooting
