Loading Tabbed Sheets In Lct (Lt-211) - Konica Minolta 8050 Instruction Manual

Loading Tabbed Sheets in LCT (LT-211)

Front
Front
• The tab extension width must be 12.5 mm or less.
• To load the tabbed sheets into LCT, contact your service representative to
position the rear stopper for the paper size to be loaded.
1.
Open the LCT top door.
2.
Press the paper loading button to lower the LCT bottom plate.
3.
Load the tabbed sheets into the LCT as illustrated above.
4.
Close the LCT top door.
Rear
Example: 3 Tabbed sheets loaded in position for one finished set.
Printed
side
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
Rear
1st TAB
Section 1
Introduction
Printed
side
Loading Paper (continued)
1st TAB
Section 1
Introduction
2nd TAB
3rd TAB
1st TAB
2nd TAB
Section 1
Introduction
Section 1
Section 1
Introduction
Introduction
3rd TAB
1st TAB
Section 1
2nd TAB
Introduction
3rd TAB
ONE FINISHED SET
2nd TAB
Section 1
Section 1
Introduction
Introduction
3rd TAB
THREE FINISHED SETS
2-31