Konica Minolta 8050 Instruction Manual page 313

(4) Click on [Apply] to immediately delete the data.
The message "Setting was deleted" will be displayed.
DETAILS: Error Message
If an error message is displayed after clicking on [Apply], data has not been
deleted due to a machine operation in progress. The machine must be in an
idle state when you click on [Apply].
Click on [Back] to return to the E.K.C. Data List window or any menu item
to jump to the desired window.
6.
Set the E.K.C. function.
Click on [E.K.C. function setting] in the E.K.C. Function Setting menu
window (see p. 11-10) or from the menu in any subsequent window.
The E.K.C. Function Setting window will be displayed.
Click on the radio button (white circle) of the desired selection item(s) so
that a black dot appears in it.
Click on [Apply]. The change made in the settings will be transmitted
immediately for the user operations.
To restore the previous setting, click on [Reset].
To cancel the E.K.C. function setting, click on any E.K.C. Function Setting
menu item.
Setting E.K.C. Function (continued)
11-17