Setting Scan Transmission Function - Konica Minolta 8050 Instruction Manual

Setting Scan Transmission Function

Make the Key Operator setting concerning the transmission of the scanned image
data using the web browser.
For details of the Scan Transmission Setting, contact your service representative.
Specifications for Scan Transmission Setting
❒ The Scan Transmission Setting is available only when the IP-901 Printer
Controller is installed in the machine.
1.
Open the Web Utilities window.
2.
Click on [Environment Setup].
3.
Display the Scan Transmission Setting window.
Enter the 4-digit Key Operator password, then click on [Apply].
The Environment Setup menu window will be displayed.
Click on [Scan transmission setting].
The Scan Transmission Setting window will be displayed.
The [Scan transmission setting] key appears in the window only when the
IP-901 Printer Controller (Fiery S300 50C-K) is connected to the machine.
11-19