Setting Print Quantity; To Set Print Quantity; To Change Print Quantity - Konica Minolta 8050 Instruction Manual

Setting Print Quantity

This section describes how to set or change print quantity.

To Set Print Quantity

The copier is initially set to copy the original set in amounts determined by the print
quantity setting, then outputs sorted sets.
1.
Enter the desired print quantity from the control panel
keypad.
Entered quantity will be displayed on the touch panel.

To Change Print Quantity

Follow the procedure below to change the print quantity that has been already
entered.
1.
Press [C (CLEAR QTY.)].
The quantity displayed on the touch panel will return to 1.
2.
Enter the correct quantity.
Entered quantity will be displayed on the touch panel.
3-10