Table of Contents
Advertisement
3.
Touch OK to complete the setting and return to the Basic Screen.
The SPECIAL ORIGINAL key on the Basic Screen is highlighted, and the
icon in the message area indicates the selected original direction.
4.
Make other compatible selections.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
6.
Position originals FACE UP in the document feeder or FACE DOWN
on the platen glass according to the original direction specified in
step 2.
See the illustration on previous page, and p. 3-4 to p. 3-9 for details on
positioning originals.
7.
Press [START].
Wh en the fin isher / tr immer un it / paper exi t t ray capac ity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
Specifying Original Direction (continued)
9-3
Advertisement
Table of Contents
Troubleshooting
