Table of Contents
Advertisement
Storing an Overlay Image in HDD / Overlaying Image Stored in HDD (Overlay Memory) (continued)
To stop scanning, press [STOP].
The machine automatically starts to store the overlaying image data in the
HDD. The Overlaying Image Selection Screen will resume when the storing
function is completed.
To continue to store the overlaying image data, return to step 4.
9.
Touch to select the desired overlaying image data, then touch OK.
The Stamp/Overlay Selection Screen will be restored.
DETAILS: Image Delete Key on the Overlay Image Selection Screen
If the IMAGE DELETE key is displayed on the Overlay Image Selection
Screen, you can delete the stored image and name. Select the image name
using up/down arrow key to scroll, then touch IMAGE DELETE.
10.
Touch OK to return to the Application Selection Screen.
11.
Touch OK to return to the Basic Screen.
The Store mode is automatically selected, and APS and AMS are released.
Set the desired conditions on the Basic Screen.
12.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
13.
Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on
the platen glass.
14.
Press [START] to scan.
15.
Repeat steps 13 and 14 for all originals.
16.
Touch STORE to exit the Store mode, then press [START] to print.
10-68
Advertisement
Table of Contents
Troubleshooting
