Locating Title Pages On The Right Side (Chapter) - Konica Minolta 8050 Instruction Manual

Locating Title Pages on the Right Side (Chapter)

Chapter is used with RADF in 1-2 mode for the purpose of locating title pages on the right
side, rather than reverse side, of a duplex copy to improve the presentation of double-
sided copies.
To effectively locate the title page on the right, a blank sheet will be automatically
created on the reverse side of a sheet, if required.
Specifications for Chapter
❒ Use RADF.
❒ Max. title pages: 30 sheets, from 1 ~ 999
❒ Use STAMP together with this function to print chapter number onto chapter
page in addition to page number, numbering, or watermark numbering. See p.
10-51 to p. 10-61.
❒ Incompatible Conditions: 1 1, 2 1, Group, Rotation Sort, Rotation Group,
Face Up, Mixed Original, Tab Paper, Combination, Image Insert, Program Job,
Multi-Page Enlargement, Non-Image Area Erase, Repeat, Storing Image in
Overlay Memory
1-sided originals
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Chapter on the Application Selection Screen.
The Chapter Insertion Setting No. Screen will be displayed.
8
7
6
4
3
5
1
2
Title pages
Copies in
Chapter mode
2
1
Title pages
6
5
4
10-7