Table of Contents
Advertisement
FULL COLOUR is already highlighted when the initial settings are restored.
The initial settings may have been altered by Key Operator. See p. 14-10 for
details.
Selecting SINGLE COLOUR will display the popup menu to specify a
colour.
Touch the desired colour key, then touch OK.
The selected colour will be indicated under the COLOUR MODE indication
of the Basic Screen, with the SINGLE COLOUR key highlighted.
Touch CANCEL to restore the previous setting.
2.
Select additional copy conditions, as desired.
If the colour adjustment is desired, see Section 7: Colour Adjustment.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
4.
Position original(s).
See p. 3-4 to p. 3-9 for details on positioning originals.
5.
Press [START].
Selecting Colour Mode (continued)
3-3
Advertisement
Table of Contents
Troubleshooting
